Test bench BT GPR CALIB

AXAUNE
26/03/2021 14:57

SEE PDF

--- (PDF)

SEE HTML

--- (HTML)

SEE MP4

--- (MP4)



GPR300 loading and unloading - BT GPR CALIB

(Draft version)
(Validated Unarchived)
(Validated)
(Waiting for Validation)



X : Gestual
X : Instruction
X : Self-Controle
X : Security

Chapitres :
  • ()
    • XXXX - ()
  • Start (00:00.00)
    • XXXX - Start (00:00.00)
  • Workshop (00:03.00)
    • XXXX - Workshop (00:03.00)
  • Tools / Components (00:08.00)
    • XXXX - Tools / Components (00:08.00)
  • 1-Install the GPR300 (00:16.00)
    • XXXX - 1-Install the GPR300 (00:16.00)
  • 1.1-Load the product on the bench (00:21.00)
    • XXXX - 1.1-Load the product on the bench (00:21.00)
  • 1.2-Connect the product (00:33.00)
    • XXXX - 1.2-Connect the product (00:33.00)
  • 1.3-Unlock the cart (00:45.00)
    • XXXX - 1.3-Unlock the cart (00:45.00)
  • 1.4-Insert the pole (01:00.00)
    • XXXX - 1.4-Insert the pole (01:00.00)
  • 1.5-Lock (01:06.27)
    • XXXX - 1.5-Lock (01:06.27)
  • 1.6-Place the product in the coil (01:18.27)
    • XXXX - 1.6-Place the product in the coil (01:18.27)
  • 1.7-Check that the cart is blocked (01:30.60)
    • XXXX - 1.7-Check that the cart is blocked (01:30.60)
  • 2-Uninstall the GPR300 (01:44.60)
    • XXXX - 2-Uninstall the GPR300 (01:44.60)
  • 2.1-Insert the pole (01:48.77)
    • XXXX - 2.1-Insert the pole (01:48.77)
  • 2.2-Unlock the cart (02:06.37)
    • XXXX - 2.2-Unlock the cart (02:06.37)
  • 2.3-Take out the cart (02:18.64)
    • XXXX - 2.3-Take out the cart (02:18.64)
  • 2.4-Completely remove the cart (02:27.30)
    • XXXX - 2.4-Completely remove the cart (02:27.30)
  • 2.5-Take off the pole (02:34.10)
    • XXXX - 2.5-Take off the pole (02:34.10)
  • 2.6-Unplug the connector (02:43.24)
    • XXXX - 2.6-Unplug the connector (02:43.24)
  • 2.7-Store the connector (02:50.37)
    • XXXX - 2.7-Store the connector (02:50.37)
  • 2.8-Remove the GPR300 (02:59.97)
    • XXXX - 2.8-Remove the GPR300 (02:59.97)
  • End (03:06.43)
    • XXXX - End (03:06.43)
    .